Cabot Oil Decking Stain
Caring for your yard
Care and maintenance of your deck is essential to protect against the harmful effects of moisture and Sun Regular cleaning and oiling help to protect the wood from damage caused by ultraviolet light, protecting it from the elements, removal of mold and bacteria, and also stops the formation cracks of wood and premature aging.
Scan and clean your deck regularly will help reduce the buildup of dirt and grime. Also, the oil from your deck every few months to protect your deck from the elements and keep it looking vibrant. You know it's time to add fuel to the bridge, you will lose the brightness I had after the last discharge and generally looking a bit tired.
Preparation
Before discussing the bridge must be completely free of dust and grime. You can use a stiff brush and a bucket of soap sugar, which is free of chlorine bleach (high concentrations, chlorine can damage the early wood). If the deck has a lot of spots that are not sugar soap will remove a number things you can do …
Try washing pressure of the cover with a small washer on an average of half pressure. (Do a test first, but make sure it is soft or it can damage wood fibers).
You can also try lightly sanding the affected area with a medium grade sandpaper. (In light of sandpaper prevents the oil from soaking the wood.)
Alternatively, you can use a deck cleaner such as Spa-N-bridge or bridge Cleaner Cabot. Both products use oxalic acid to strip the wood aging and performance wood to its former glory.
Note: Using a pressure washer or cleaner cover is usually much less time to sand the entire deck, but sanding works well in small areas and deep stains.
After cleaning, wait for your deck to dry completely before applying oil or stains.
Treatment
The next step is to decide whether to use a tincture or oil. We believe that if the wood retains its natural color is best only to oil. We use oil Cabot natural bridge that has a little pigment in the wood seems to be a live bits.
There are plenty of products out there that are as good as at Cabot do not be afraid to try something else.
As for color, this is usually done when the wood is gray or very tired and want to change the color of the cover. There a wide range of colors and products to choose, provided they comply with the good brands like Cabot, spa and terrace or Haymes usually can not go wrong.
Request
When oil or stain the deck, be careful not to apply too much product – you do not want to get the film on the wood surface when in reality, penetration. It is best to apply the product over the entire length of each table while maintaining a wet edge to avoid overlap.
Use an applicator with a handle makes product application easier, but a brush or roller can also be used. Usually 2-3 applications are necessary.
Remember to apply the oil slick or the conditions proper time. Avoid applying in direct sunlight, wind and temperatures 30 degrees or higher, and be sure there is no possibility of rain for the next 24 hours.
Always follow the manufacturer's instructions on the label and all product literature that accompanies it.
About the Author
Jaden Meek is the Director of Deck It Out! Landscape And Outdoor Solutions a Melbourne based Landscape Design and Construction Company.